Enter a device for high voltage equipment testing can not hurt

Enter a device for high voltage equipment testing can not hurt, since the test is successful. Attention to the following steps to ensure the safety of all technical and to ensure circles.

For high voltage test?

The main reason that the application of this technique is that each part of the circuit isolated from the rest. With small defects in a short-circuit test is not normal, but over time can lead to catastrophic failure of the equipment. And it can be a small cut in the insulation and corrosion of the connectors, improperly or drive from many other sources of short-circuiting problems.

This test is also called a hypothesis test (high capacity) differs from the proof of continuity of most technicians are familiar with. Ensures continuity test current flows easily, so I went along. High test voltage controls the flow of current is not that I do not want it. HV paid outside the normal limits operation to "leak" electricity can be easily found.

As security test

Test equipment is not the capacity to handle High Voltages stress test you. The reason is turning carefully so that it does not happen to fall in voltage sensitive components are tested. Remember that this problem is not the voltage, current will flow when there is no voltage drop.

Should be carefully studied and mental circle invaded networks. And you can see two or more points connected by wires. If the network is to be tested, and any cable, the voltage can be applied safely. If the network components, such as resistors, capacitors, the voltage applied to each point of the network, so that the tension on both sides of each of the components is the same. While both parties in the higher voltage, not the will of a chain component can be damaged.

Use quality test equipment

Once the damage potential high voltage or damage tolerance testing of the technical team, the tags are used in high quality. Stress can cause a current flow incorrectly at the wrong time, and the destruction of components.

You should be aware of the technical characteristics of the test equipment. Not all models work the same way, It does not work model and the other not, even if they are made by the same company. Technicians must be exercised in unwanted equipment until you have mastered the technique. So, if there are no errors damaged expensive equipment.

Once the technical performance is a High Voltage Test several times, is routine. The circuit can be tested quickly and safely, and safety wiring and equipment.

Electrical insulation is sufficient for the operators of protection against electric shock

Electrical testing hypotheses is ideal to be used to increase the electrical resistance of the test and ensure that the galvanic separation of various electrical devices. As is known to cap test also test hypotheses (an acronym derived from "high capacity"). Simply, this is an electronic device that insulation (the transfer of power from one point to another point to ensure) the device that can make someone a collision problems. In fact the opposite of continuity test.

Insulating ability is the main criteria to be checked by the examiner and this is not just the level of electrical insulation is sufficient for the operators of protection against electric shock. And try the chances of insulation for different devices, cables, wires and other associations to DC Hipot Testing.

§  They have to be able to High Voltage Test equipment for testing. The tests included testing hypothesis tester, insulation, Flash or break test and see if there is a failure or a place on the team.

§  According to EN-voltage test equipment that is regularly used by this sample of about 6 kV. While this unit should be tested to make sure they are well equipped with a safe work station test environment.

§  Dielectric Test series or responsible and bought two pregnancy test advanced digital and online organizing. This test has the ability to increase the security measure.

§  Start to test this is to ensure that the test unit with the security requirements based on standards set by the operator UL, CSA, IEC and other certification bodies.

§  People who are unaware of the hypothesis test is to stay away from the workstation. This must be the change of the electrical equipment under strict authorization and be careful when dealing with test equipment.

§  Act as electrical safety tests are appropriate for test driver, electrical insulation, and leak and clean hotel.

§  All users test the hypothesis trained and should follow the instructions of the test only after that can the security measures for emergency escape.

Scratches in the isolation of the conductive metal wires, erosion and related problems, as short supplies. Defects, even in the small circle of malfunction. It is therefore necessary to test hypotheses to ensure that every part of the circuit insulation and safety and quality protection of electrical circuits.